Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob has stopped working after a few days it could be due to a dead battery in the coin or water damage or receiver module issues, or a damaged electronic chip. Fortunately, all of these are simple to fix and you'll be able to get your vehicle back to normal in no time!
Car keys can also get damaged due to the fact that the blade on the key gets worn. This is a simple fix when you visit your local Car Key Man Auto Locksmith and let them fit the new blade for you.
peugeot key fob in your Peugeot 308 may die or become weak enough to not send a strong signal. The key fob could not function and stop you from locking or unlocking your doors or even starting your engine. You'll need a new battery for the key fob in order to fix this.
You'll have to purchase batteries for replacement from an auto parts store or your local hardware store. When you buy the battery, make sure that it's brand new and hasn't been sitting on the shelf for a long time. A new battery will have greater capacity and can send a stronger signal to the car.
After replacing the battery, try unlocking the doors and locking them using the key fob. If the doors don't open then the receiver module in the car is the cause. The local Peugeot dealer can reprogramme the receiver module.
The internal chip of the key fob might be damaged. This could happen if drop your key fob on the ground or expose it to water. Rubber seals that shield your chip from moisture can get worn out over time. This is especially the case if you expose your key fob to water for prolonged periods of time, like swimming it in the ocean. To stop this from happening, it's important to keep your key fob free from moisture and to never let it come into contact with water.
Water Damage
Don't lose hope on your key fob when it becomes wet, whether you dropped in an aquisition or stumbled into a pool. Although the key fob is equipped with rubber seals that protect it from water, prolonged exposure to water may result in damage to its electronic chip. Since water is an excellent conductor, any water that is able to get inside the key fob can result in a series of short circuits that will eventually damage the chip. After removing the battery scrub its contacts with isopropyl ethanol and dry it completely before putting it back into.
A dead battery could be the reason why your Peugeot 308 won't start. Jumper cables are a fantastic method to start the engine if you own an additional car. If the battery is the issue then it must be replaced.
Another possibility is an ineffective receiver in the vehicle, which could hinder it from receiving a signal from the key fob. The key fob could be damaged or there might be an issue with the antenna, wiring, or the key fob itself. If you're using the latest key fob, it may require to be programmed into the vehicle. If you are unable solve the issue, contact a professional technician. A skilled technician will be able find the issue quickly and fix it promptly.
Radio Interference
Signs like key fobs that are not recognized or having a limited range usually indicate that there is interference in the system. The interference could be transmitted or radiated the latter being caused by power cables and speaker cables being too close to electrical components. Usually, rerouting the cables or moving them away from the components can resolve the issue.
It's unlikely that someone is listening to your key fob's signal in attempt to steal your vehicle It's possible, however, that radio interference has slowed the signal. Fortunately, this issue is simple to repair.
If your key fob not being recognized, try a new battery. Also, ensure that the battery is the right size and type. Batteries of the wrong dimensions can harm your battery.
Some aftermarket alarm systems and radar detectors use the same radio frequency as your key fob and they can cause them to interfere with your key signals. Do not connect these devices to your key fob.
Pairing Issues
The remote keyless entry system has a receiver that receives radio frequency signals from the key fob. If this receiver has developed a problem, you won't be in a position to begin your vehicle, even if the key fob functions and can be reset. The issue can be caused in a number of ways, including by the battery of the coin-cell being dead or water damage. The receiver could also be failing due to a software glitch or internal damage to the key.
One of the most common reasons that your Peugeot 308 key fob isn't working is because the battery inside has gone out of service. The battery can be replaced, but be sure it's the right battery for your key fob. The wrong battery could result in further problems with the key fob, therefore it is recommended to use either the original or an alternative that is similar in size, voltage and specifications.
Another reason that the reason why your Peugeot 308 key fob might not work is because it is paired with another vehicle. It is possible that you have accidentally given your key fob away to a friend or the key was used to unlock other vehicles. This can be fixed by reprogramming your key fob using an OBDII scan. This scanner will typically ask you for certain information about your vehicle, such as the VIN or engine type, and it's essential to fill in the correct information.